亚搏体育官方网站app-官网下载

Tai'an Lize Machinery Technology Co., Ltd.
Tai'an Lize Machinery Technology Co., Ltd.

Congratulations on the website of Taian Lize Machinery Technology Co., Ltd.! The company always adheres to the principle of "quality-oriented, customer first", and warmly welcomes guests from all over the world to come to our company to discuss cooperation!

Product List

LZ35-9 Configuration

LZ08 mini excavator

LZl0 mini excavator

LZl6A mini excavator

LZl6B mini excavator

LZl8A mini excavator

LZ20 mini excavator

LZ22 mini excavator

LZ26 mini excavator

Concrete mixi pump

Concrete pump

Contact: Mr. Miao

Mobile:+86 15662021866

Mobile:+86 13675488966

E-mail: tsly688@163.com


Address: G104 East 66 meters, Xia Zhang Zhen Bei Zhuang village, Daiyue District, Tai'an, Shandong

News Position:Home > News

    Safety procedures for small excavators before work

    Safety procedures for small excavators before work

    Safety procedures for small excavators before work

    1. Know the construction conditions and tasks to the construction personnel. The contents include: the height and depth of the excavated soil, the height of the slope and wire, the underground cable, various pipes, tunnels, graves and various obstacles. After the excavator enters the site, the driver should follow the relevant safety rules at the construction site.


    2. When excavators work in rocky soil or frozen land, they should first blast and then excavate.


    3. Inspect, maintain, adjust, and tighten the excavator according to routine routine maintenance items.


    4. Check if the fuel, lubricating oil and cooling water are sufficient. If it is insufficient, it should be added. Do not smoke or close to open flames when adding fuel to avoid fire.


    5. Check the insulation of the electrical circuit and the contact of each switch.


    6. Check all the pipelines of the hydraulic system, operating valves, working cylinders, oil pumps, etc., whether there is leakage, and whether the action is abnormal.


    7. Check whether the clamps of the wire rope and the fixed wire rope are firm and reliable.


    8. Put the main clutch lever in the “Neutral” position and start the engine. (If it is a hand crank, pay attention to the handle and hurt the person; if the rope is started, do not wrap the rope around the hand). Check whether the instruments, transmission mechanism, working device and brake mechanism are normal, and confirm the correctness before starting work. 9. After the engine is started, it is strictly forbidden to stand in the bucket, on the arm, on the track and on the shed.

    Safety procedures for small excavators before work 2017-11-16 This article has been read 567 Times
    Rear:Do you really know about small excavators?Before:Small excavators should be kept and maintained if they are not used in winter.

Home              About us

Product           News

Case                Video

Honor             Contact

LZ08            LZl0

LZl6A          LZl6B

LZl8A          LZ20

LZ22           LZ26

Mobile:+86 15662021866    +86 13675488966

Tel: +86-538-8390177    +86-538-8390288

E-mail: tsly688@163.com

Address: G104 East 66 meters, Xia Zhang Zhen Bei Zhuang village, Daiyue District, Tai'an, Shandong

Scan the code and enter the mobile station

Copyright© Tai'an Lize Machinery Technology Co., Ltd. 

Baidu
sogou